CuSn7ZnPb7 solid bronze bushing

CuSn7ZnPb7 solid bronze bushing graphite plug

CuSn7ZnPb7 Solid Bronze Bushing: The high performance bronze Solution for Steel Structures

When it comes to ensuring the longevity and efficiency of steel structures, the choice of materials for components like bushings and bearings is crucial. One material that stands out for its exceptional performance is the CuSn7ZnPb7 Solid Bronze Bushing. This high-performance alloy is specifically designed to meet the demanding requirements of steel structures, offering unparalleled durability, wear resistance, and corrosion resistance.

Applications of CuSn7ZnPb7 Solid Bronze Bushing

Steel Structures

CuSn7ZnPb7 Solid Bronze Bushing is widely used in steel structures for applications such as:

  • Sliding Bearings: Provides smooth operation and reduces friction.
  • Bushings: Ensures long-lasting performance even under high stress.

Other Industrial Applications

  • Mechanical Engineering: Used in sliding bearings, bushings, gears, and wear strips.
  • Automotive Industry: Ideal for gearboxes, clutches, and suspension systems.
  • Marine Equipment: Excellent performance in ship bearings, propeller shafts, and rudder components.
  • Hydraulic Systems: Used in hydraulic cylinders for guiding bushings.

Service Conditions and Failure Modes

CuSn7ZnPb7 bushings are chosen for dirty, damp, or shock-loaded environments because the soft lead phase conforms to minor misalignment and embeds abrasive particles. Watch for these failure modes:

Failure mode Typical symptom Common cause
Excessive wear Inner diameter grows, vibration or noise rises Poor lubrication, abrasive particles, overload
Fatigue Surface spalling or pitting Cyclic loads, repeated impact
Galling or seizure Local welding, material transfer Sudden lubrication loss, extreme load or speed, misalignment
Corrosion Pitting or discoloration Chemical or electrochemical exposure
Plastic deformation Permanent indentation, gap change Overload, misinstallation, wrong material
Cavitation Honeycomb surface Rapid fluid pressure changes, e.g. in mud pumps

Material Selection and Upgrade Path

When the duty cycle exceeds the envelope above, step up the alloy rather than over-specifying CuSn7ZnPb7:

If your duty is… Consider Why
Higher speed or frequent misalignment C93700 Higher lead for conformability and speed tolerance
Heavy shock loads or seawater C95400 / C95500 (aluminum bronze) Strength, corrosion resistance; pair with hardened shaft
Extreme load at low speed C86300 (manganese bronze) Very high yield strength
Lead content is restricted C89320 (bismuth bronze) or C87800 Lead-free alternative for compliant markets
Light, low-maintenance duty SAE 841 sintered bronze Oil-impregnated, no external lube

Lead Content and Compliance Note

CuSn7ZnPb7 contains 6-8 percent lead by design for machinability and embeddability. For export, note:

  • EU RoHS and REACH: industrial bearings are usually exempt under machinery provisions, but confirm per end use.
  • US California Prop 65: a lead warning label is required on articles that may cause exposure.
  • Potable water: C93200 / CuSn7ZnPb7 is NOT compliant for wetted potable-water components; specify C95400, C95500, or C87800 instead.
  • Graphite-plugged CuSn7ZnPb7 is self-lubricating in the boundary regime; standard grades still need periodic grease.

Get the superior CuSn7ZnPb7 Solid Bronze Bushings for Your Industrial Needs!

The CuSn7ZnPb7 Solid Bronze Bushing is a high-performance solution designed to meet the rigorous demands of steel structures and various industrial applications. Its exceptional wear resistance, corrosion resistance, and self-lubricating properties make it an ideal choice for ensuring the longevity and efficiency of your machinery.

For more information on CuSn7ZnPb7 Solid Bronze Bushing and other high-quality bearing solutions, visit www.bearingface.com.

By choosing CuSn7ZnPb7 Solid Bronze Bushing, you are investing in a durable, reliable, and high-performance component that will enhance the efficiency and lifespan of your steel structures and machinery.

Related Bronze Bushing References

Explore the same alloy under other standards and its common applications:

Frequently Asked Questions

What PV limit applies to CuSn7ZnPb7 (C93200) bronze bushings?

Boundary-lubricated continuous service is around 2.8-3.5 MPa.m/s (50000-75000 psi.fpm). For long life, design below 2.0 MPa.m/s. Pressure and speed cannot both be at maximum at once.

What clearance and shaft hardness should I use?

Start with a running clearance of 0.0015-0.0025 times the shaft diameter and pair the bushing with a hardened steel shaft of HRC 40-55. Unhardened shafts are acceptable only under full hydrodynamic lubrication.

Is CuSn7ZnPb7 self-lubricating?

The lead phase gives boundary-lubrication anti-seizure behavior, but standard bushings still need periodic grease. Only graphite-plugged versions are self-lubricating.

Can CuSn7ZnPb7 replace C93200?

Yes. CuSn7ZnPb7, DIN 2.1090, and C93200 (SAE 660) are the same leaded tin bronze family and are interchangeable for general-purpose bushings subject to the small composition-window check above.

Design Custom Bearings Made From High-Strength Bronze Bearing

Custom Machine Parts & Custom Bronze Components –

Custom Bronze Parts & Custom Bronze Bushing Bearing