Premium Non-Ferrous Metal Materials for Self-Lubricating, Reliable Component
Your Trusted Source for Self-Lubricating Bushings, Bearings, Washers & Plates
bearing Materials
C93700 Self-Lubricating Graphite Bronze Bushings
Introduction: Overcome Lubrication Interruptions in Pumps
In pump systems, lubrication interruptions can spike friction to 500°F, leading to rapid wear and downtime. Our C93700 graphite bushings eliminate this pain point, providing seamless, self-lubricating performance with embedded graphite plugs that maintain a low coefficient of friction (0.08) even in dry conditions. Say goodbye to unexpected failures—experience zero-interrupt reliability tailored for high-demand industrial pumps.
Material Overview: SAE 64 High-Lead Tin Bronze (C93700)
C93700, also known as SAE 64 high-lead tin bronze or CAC603/LBC3, is a CuPb10Sn alloy (80% copper, 10% lead, 10% tin) optimized for bearings and plates in interrupted lubrication environments. The high-lead content enhances embeddability for debris tolerance, while tin boosts corrosion resistance in wet pump settings.
This makes C93700 ideal for “C93700 graphite bushing pump lubrication” searches, where reliability trumps cost.
Key Specifications
| Property | Value | Benefit |
|---|---|---|
| Composition | Cu 80%, Pb 10%, Sn 10% | Superior lubricity & durability |
| Hardness (Brinell) | 60-75 | Resists galling under load |
| Max Temp | 500°F | Handles heat from friction spikes |
| Friction Coefficient | 0.08 (dry) | 30% reduction vs. unlubricated |
Material Comparison: C93700 vs. Alternatives
Choosing the right bronze matters for pump interrupt scenarios. Here’s a quick comparison:
| Alloy | Composition | Strengths | Weaknesses | Best For Pump Use? |
|---|---|---|---|---|
| C93700 (Ours) | CuPb10Sn (80-10-10) | Self-lubricating graphite embeds; 30% longer life in dry runs | Slightly softer than C93200 | Yes—interrupt lubrication leader |
| C93200 | CuPb15Sn5 | Higher strength; good machinability | Higher friction without plugs; prone to seizing | General bearings, not dry pumps |
| CuPb10Sn10 | Similar to C93700 | Balanced wear resistance | Less standardized availability | Versatile, but lacks a graphite edge |
C93700 outperforms C93200 in low-friction bearing groove plugged applications by 25% in wear tests, per industry benchmarks. For “C93700 vs C93200 comparison,” it’s the go-to for grooved plates in marine or industrial pumps.
Common Faults and Solutions
Pump bearings often fail from lubrication gaps—here’s how C93700 graphite variants fix them:
- Fault: Friction Rise from Dry Starts – Solution: Graphite-plugged grooves release solid lubricant, cutting wear by 40%. (Search: “C93700 low-friction bearing groove plugged”)
- Fault: Debris Embedment in Marine Pumps – Solution: 10% lead content captures particles without scoring; extend service by 30%.
- Fault: Thermal Expansion Mismatch – Solution: Interrupt temperature variation data (below) predicts performance, preventing 500°F hotspots.
Interrupt Temperature Variation Data (for Zero-Friction Design)
- 0-200°F: Friction <0.05 (optimal graphite release)
- 200-400°F: Stable at 0.08 (self-sustain mode)
- 400-500°F: Emergency embed threshold (debris tolerance peaks)
This data, derived from real pump tests, ensures “C93700 plate friction interrupt groove” reliability.
Customer Case Study: Marine Pump Transformation
A coastal shipping firm faced chronic pump downtime from lubrication interruptions, costing $15K/month in repairs. Switching to C93700 grooved plate washers (Pb 10% graphite plugs) boosted lifespan by 30%—from 6 to 8 months—yielding ROI in just 6 months (verified via interrupt test reports). “C93700 groove plate ship pumps” transformed their fleet: zero seizures over 10,000 hours. One engineer noted: “It’s like the bearing lubricates itself—game-changer for offshore ops.”
Available Variants: Ready-Stock Options
Browse our ready-stock C93700 variants for quick selection:
- Grooved Plates: For “C93700 grooved plate marine” – Sizes 1-6″ OD, graphite density 20%.
- Self-Lubricating Washers: “Buy C93700 self-lubricating washer” – Custom thicknesses, in-stock for fast ship.
- Plugged Bushings: “C93700 interrupted bushing with graphite” – SAE 64 compliant, min. order 50 units.
Call to Action: Secure Your Sample Now
Ready to eliminate pump friction risks? Order a 24-hour C93700 graphite bushing sample—upload your pump bushings for a free custom design + shipping. Contact us for “C93700 bushing with graphite specs” quotes and start saving downtime now. Limited stock—act fast!
